Официальный сайт ЗАО «НПК «Инэра»

Индукционные котлы для отопления и горячего водоснабжения торговой марки SAV

Каталог индукционных котлов мощностью от 2,5 до 500кВт - МОНТАЖНЫЕ НАБОРЫ

Каталог индукционных котлов мощностью от 2,5 до 7кВт - ГОТОВЫЕ РЕШЕНИЯ

Преимущества индукционных котлов

Принцип действия индукционных котлов

Экономия при эксплуатации электрического отопления

SAV – качественный и надежный профессиональный инструмент для решения задач по организации эффективного теплоснабжения и горячего водоснабжения в домах, офисах, квартирах, промышленных зданиях и сооружениях, производственных технологических процессах.

Переход на индукционный нагрев снижает эксплуатационные затраты преимущественно на 30%

+7 (495) 766-53-17

Где купить?

Ищем партнеров по производственной кооперации. Заинтересованные компании просим обращаться к руководству компании Инэра.

The mode of operation of the induction boiler SAV

Scheme and the principles of the induction heating boiler

The boiler works by means of an induction coil, which creates a variable magnetic field using current of 50 Hz frequency. The metal maze system, which intensifies the heat exchange, is heated by means of magnetic reversal and practically without loss transfers the released energy to the heat carrier.

The principles of induction

The mode of induction heating is easily illustrated using an inductor with a magnetic field, which is changed together with the current strength change. The field is closed inside the coil and the intensity depends on the current strength and the number of coil turns.

Induction heating

When placing a metal object inside the coil there will arise eddy currents, which as a result of electric resistance of metal will cause heating of the surface. Heating effect increases with the field intensity increase and depends on the material properties and the size of the coil.

In the boiler there is used an induction coil, which in addition to consumption is also a generator, as its conductor is allocated in the variable magnetic field that causes generation of reactive power. During the process of recovery the active current, consumed from the network is very slight, and the reactive current closed in the loop is strong enough, which enables boilers SAV to use the extra power produced in the oscillating circuit and to reduce energy consumption.